Menu
Cart

Complete Racer Drone QAV250 KIT - NO VR GLASSES - NO CAMERA - YES TRANSMITTER

seacans.com

  • $199.00 CAD


40 PIECE DUPONT WIRE FOR CC3D

40 x 30cm Male To Female DuPont Breadboard Jumper Wire Cable

Description:
Item Name: Male to Female Jumper Wires
Length:30cm/11.8''
Quantity: a row of 40 roots
1p-1p male to female header
Compatible with 2.54mm spacing pin headers

Features:
40pcs chromatic male to male color jump wire
High quality and in good working condition
Durable and reusable
Easy to install and use
A popular choice for construction or repair
Be used for electronic project and Genuine Arduino product

Package included:
40 x Jumper Wires

CC3D OPEN SOURCE FLIGHT CONTROLLER BOARD 32 BIT WITH PROTECTION CASE FOR QAV250

1x  Openpilot CC3D Open Source Flight Controller

1x 8pin cable
2x 4pin cable
1x Box

2700MAH LI-BATTERY - WILD SCORPION RC/DRONE BATTERY - FITS DJI PHANTOM

The Wild Scorpion series RC Battery is Perfect for high performance models, higher capacity than comparable size packs,suitble for RC Car Airplane Helicopter Part.Features: Higher charge voltage than standard lipos.     Perfect for high performance models. Higher capacity than comparable size packs. Heavy duty silicone wire discharge leads. Rechargeable battery.Specification: Brand: Wild Scorpion Battery capacity: 2700mAh The discharge rate: 30C Max charging rate: 5C Battery section: 3S(11.1V) Dimension: 104 * 33 * 26.7mm (4.0 * 1.29 * 1.05 inch) Weight: Approx.205g (7.24 oz) Charge Plug: JST-XH Discharge Plug: XT60 Note: due to the difference between the measurement, the battery dimension and weight may have little error.Package information: Package size: 13.5 * 4.5 * 4.2cm / 5.3 * 1.77 * 1.65in Package weight: 223g / 7.88 ozPackage list: 1 * Wild Scorpion 11.1V 30C MAX 40C 2700 mAh 3S XT60 Plug Li-po Battery

QAV250 SOLDER BOARD

Weight:4gm

QUAD 5030 PROPELLER PAIR (4X)

Specificationas: 5 * 3-inch 

Blades: 4 
Propeller Material: Nylon
Weight: 4g one pair

MT2204 KV2300 BRUSHLESS DC QUADCOPTER MOTOR (4x)

Includes a Japanese NMB ball bearing Japanese Kawasaki stator decreases heat build-up

Max Thrust:440G

Length:32.5mm

Weight:25gm

Shaft:3mm

Diameter:27.9mm

QAV250 CARBON FIBER 4 AXIS MINI 250 FPV QUADCOPTER FRAME KIT

This Carbon Fiber 4 Axis Mini FPV Quadcopter Frame is specially designed for new entrants and also perfectly suitable for experienced DIYers. The Carbon Fiber fuselage is 1.5mm thick and the arms are 3.0mm. This effectively reduces shaking. The fuselage is joined by aluminium beams. 

FPV TS351 TRANSMITTER

Item Name: TS351 transmitter

Transmitter frequency: 5645-5945MHz; 8CH
Frequency control: built-in frequency and phase lock loop
ANT Connector: SMA(inside the needle)
Video output: 1Vp-p 75Ω
Audio output: 1Vp-p 600Ω
Power supply: DC 12V
Video: PAL/NTSC
Dimension: 52mm x 68mm x 13mm
Built-in microphone audio pick up device
Built-in high-frequency PLL stability
8 Channel selectable
Low harmonic radiation
Direct input analog audio and video signals

Working frequency:
CH1: 5705
CH2: 5685
CH3: 5665
CH4: 5645
CH5: 5885
CH6: 5905
CH7: 5925
CH8: 5945

Package Included:
1 x TS351 transmitter
1 x Stock dipole whip antenna
1 x Power in harness
1 x Power out Video out Audio out harness

QAV250 20A MOTOR CONTROLLER (4x)

Output capability: Continuous current 20A, 25A inrush current at 10 seconds.

Power input: two lithium batteries or 5-6 NiMH / NiCd battery pack.

BEC Output 2A / 5V linear regulator BEC output mode

Maximum speed: 210000 r / min 2-pole motor, 70,000 rev / min 6-pole motor, 35,000 rev / min

Size: 25mm  40mm  8mm

Weight:19grams